Lumistrips EN
Lumistrips US
Lumistrips ES
Lumistrips PT
Lumistrips ITA
PowerController V2 Light Control Unit Tunable White via DALI 209 2-outputs, 10-30VDC up to 300W
- Integration of 2x Tunable White in a DALI 209 system
- Total switchable up to 300W or 10 A via the output channels (1x 10 A / 2x 5 A)
- For control of constant voltage LED modules or strips (output voltage from 12 - 30 V)
Compact Tunable White controller with DALI 209 compatibility
This new version of the PowerController V2 is Dali enabled for easy control of tunable white color LED modules. You have the option of integrating up to 2 DALI 209 devices into a DALI system from a small package of only 100 x 29 x 19 mm in size. The DALI TW devices can be LED modules or strips with 10-30VDC input voltage and up to 300W total power. You can connect LED modules with tunable white LEDs in one single row or parallelrows of single color temperature LED strips.
And this is how the installation works
Connection
Connect the two DALI inputs (DA2) on the PowerController to the DALI BUS cable. The 4 outputs (CH1-CH4) are each connected to the negative line of the respective modules. Connect the cold white connection of the first 209 device to CH1 and the warm white connection to CH2. Similarly, the second module is connected in the same way to CH3 and CH4. The positive leads are connected to OUT via terminals (part no. 33736). The operating voltage is provided by GND and VCC.
How it works
After all components have been properly wired, power can be applied to the PowerController V2 DALI 209 TW and an addressing can then be performed on the DALI BUS. Depending on the software used, new DALI devices will appear which can now be individualized.
Simple installation due to minimal size
The slim format and the practical input or ouput terminals allows easy installation in control cabinets. A total of up to 10 A (300 W) can be switched via the outputs. The PowerController V2 DALI allows the control of constant voltage LED modules.
Control of multiple constant current LED modules is also possible
The Powercontroller V2 unit is compatible with the new extension constant current LED driver, article number 34722. With this driver you can control up to 4 groups of lightsources at a constant current of 1-1500mA and 4-42 V, such as our LinearZ LED modules.
Features
- Integration of 2x Tunable White in a DALI 209 system
- Output power: 120 W at 12 V DC; 240 W at 24 V DC; 300 W at 30 V DC
- Total switchable up to 10 A via the output channels (1x 10 A / 2x 5 A)
- For control of constant voltage LED modules or strips (output voltage from 12 - 30 V)
- Input voltage depending on LED module (12 - 30 V)
- The compact design with a height of 13 mm and a width of 29 mm allows easy installation in control cabinets. The practical clamps enable easy and quick installation.
- Ideal for controlling all types of luminaires with Tunable White LED modules, e.g. ceiling luminaires, industrial luminaires, floor luminaires, wall luminaires, suspended luminaires
| SKU | 35037 |
|---|---|
| Weight brut (g) | 1.000000 |
| Brand | Lumistrips |
| Manufacturer Product Code | 32156 |
| Dimensions: Length (cm) | 10 |
| Dimensions: Width (mm) | 27 |
| Dimensions: Height (mm) | 19 |
| Availability beyond shown stock: | YES |
| Product Family | PowerController |
